Help with TP-Link XZ000-G7 Gigabit XPON Terminal Configuration for BSNL FTTH

[RajaTamil]

@abhishek.t thanks for the reply. I will check and purchase that. Currently, I have plugged the SC UPC patch cord into the XZ000-G7 SC APC port. Could that have damaged the XZ000-G7 port (inside the equipment)?

 

[abhishek.t]

@RajaTamil no, damage is unlikely coz the connectors have some play in them. besides, the 'port' that you have in onts is simply a coupler (the one i mentioned earlier). there is a connector inside the device as well identical to the one we plug in, both get coupled at the port.

 

[abhishek.t]

this is all you need @RajaTamil

 

[sloj]

Blue coupler will be required. Green will do fine I guess but there is a difference.

 

[abhishek.t]

the colour only serves the purpose of identifying what kind of connector is plugged in on the other end, let's say, inside a patch panel, coz ports are also just couplers. they are colour matched simply to avoid connector mismatch.

 

[proton8454]

Or maybe get these cheap adapters

 

[sloj]

@abhishek.t I didn't search enough for a definite answer but here is one datasheet.

 

[abhishek.t]

IEC 61754-4 (Interface IEC 61754-4-2 aka Simplex adaptor connector interface – push/pull), check intermateability in Table 2, Pg 7 and geometry/tolerable dimensions on Pg 11

 

[sloj]

There is a minimum and maximum and it's just a standard. Let's just hope the actual product connects properly and works.

 

[sloj]

Also, since the g7 isn't TEC certified I wonder how long will they allow it before blocking it.