How to Connect TP-XZ000-G7 to Airtel Xstream Broadband?

[hariselio]

@MZRecords no display at all? not even any garbled characters? In that case, may be UART connection is not correct or not soldered properly?

 

[user848654]

I get this is if I change speed to 15200.

 

[pjgowtham]

@MZRecords Local technicians aren't knowledgeable with bridge mode and such. You can contact airtel customer care and raise a complaint asking them to remove bridge mode because your router is faulty. That way they will do it for sure. No need to ask any local person. They usually do it on the same day.

I have done this a few times.

 

[Hitori_Abhito7]

@pjgowtham Brother we are way beyond default router bridging

 

[shivammangla]

Can anyone help how to access this xpon gui after configuring it with router.

 

[Sanemi]

@shivammangla you can access the xpon gui by router or pc by changing the dynamic to static mode and give the xpon default ip address

 

[tr1k0N4]

What's your router? Unless you have something like a OpenWRT or Mikrotik etc. you won't be able to access the GUI, after connecting it to your router.

 

[shivammangla]

@tr1k0N4 archer ax10...my xpon gateway is default 192.168.1.1 and 192.168.1.2 is router gateway but not able to access

 

[shivammangla]

@Sanemi my xpon is in default setting only with default gateway of 192.168.1.1
p.s. I am able to access with direct cable to laptop...I meant to access it after router configuration

 

[Deleted member 86271]

Hi, i also have bridge mode active in my Gx titanium 2122A and can't connect with PPPoe on TP-XZ000-G7, tried with TP-Link router and er605 with vlan 100. if anyone can confirm if disabling bridge mode could fix it?