XZ000-G3 v1 with JioFiber UL speed slower

[dcosmopolitan]

Hi, as seen in the forum I was able to setup G3 v1 for JioFiber connection with Archer AX10 router.

The problem is that I'm getting slower upload speeds. My plan is 300 Mbps.

I have tried both czech and brazil firmware for G3 v1.

Download speeds are reaching my plan speed 300 Mbps but upload is fluctuating between 150-250 Mbps no matter what.

Is this is a limitation of the setup or G3?

 

[Myself]

@dcosmopolitan try using google or cloudflare DNS on ipv4 and IPV6 if required

 

[dcosmopolitan]

I am using Cloudflare DNS for both IPv4 and IPv6.

 

[Aashish.007]

Is upload speed normal on Jio equipment?

 

[dcosmopolitan]

Yes. I'm getting 300+ Mbps DL/UL on JFHG.

 

[a.banerjee]

I have a 1 Gbps connection and XZ000-G3 v1. Do not believe the speedtest.net or fast.com bandwidth tests. Try the Azure download and upload speed test, then only you will know the actual bandwidth.

 

[Dushie]

Facing the same issue on G3-V2 just set it up today. Is there any fix or workaround to increase the upload speed.

 

[akshay71]

You have to update your firmware to the latest.

 

[Dushie]

my G3-V2 - comes with FIrmware version 3.14 build 230129 Rel.6803n . There are risks invloved in updating firmware. As not sure what other issues may come up. So iam skeptical especially with Jio Fiber. Also i would be more comfortable doing this if i have a backup of my existing firmware.

 

[dhwaniraj]

Make sure your fiber connector is green color(apc). Mismatching apc and upc(blue) results in low speeds.