BSNL Broadband: Port Forwarding

[essbebe]

@ailorphobic Welcome to Broadbandforum.in
Post screenshot of your modems device status showing Board Id software version firmware version etc.
http://i13.tinypic.com/81gwtw7.jpg Click Advanced and select Virtual server.
Port Forwarding for the UTStarcom UT-300R2U

 

[ailurophobic]

Thanks for the prompt reply...here's the screenshot. There's no Virtual server under NAT

http://i27.tinypic.com/wgp121.jpg

http://i27.tinypic.com/ioelqr.jpg

 

[mahehellraiser]

Yes the above screenshot is of my modem type...and i searched everywhere for port forwarding there is no guide for this modemor is there any other way to increase my speed in torrents...:wall::wall::wall:

 

[ailurophobic]

I think they're giving these modems only in bangalore...my old 502T did the job pretty well...there has to be some software to forward ports.

 

[essbebe]

The firmware has to be updated. The company web site does not give any help for firmware upgrade.
If you use Dialer No PF required. ( or use DMZ zone with AV/Firewall/Antispy programs installed )
2. You can use another router with 4 lan ports with /without WIFI, with these PF options.
.3. http://i27.tinypic.com/wgp121.jpg . Will look out equivalent boards ( beetel220Bx same board)http://i23.tinypic.com/xgkx6u.jpg

 

[ailurophobic]

I have a D-Link wireless router with 4 ports...how will that work?

 

[essbebe]

I anticipated it ! please go through the thread. select your D-Link model from leftside bottom side menu.. ( what is your model ?)
DI-524
Key HINT: Connect to LAN1 or LAN2 Rj45 from Ut300r2U

Double Portforwarding-modem and router(edited ) - Tech Support Guy Forums

Here's a link to the user's manual for that modem: http://mumbai.mtnl.net.in/triband/ht...srguide1.0.pdf

I'd personally consider setting the modem in bridge mode to eliminate it's routing function, then you can do all the port forwarding in the Netgear. Those instructions start on page 19 of the manual. The other option is the configuration I described previously for a secondary router and using the modem/router to do the port forwarding.

Finally, here's a guide for most applications for port forwarding for your modem/router if you decide to go the route of my secondary router configuration: http://portforward.com/english/route...00R2Uindex.htm



If you think experts are expensive, wait until you see what amateurs cost you!

 

[ailurophobic]

So i should put the ut300r2u in bridge mode and connect the cable to lan1/lan2 of the D-Link right?

Also should i delete the vci/vpi settings for the "pppoe_0_35_1" in the ut300r2u modem?

One more thing, Why do i already have so many bridgings done? I got the modem/router only today...

http://i26.tinypic.com/2chammt.jpg

 

[essbebe]

Also should i delete the vci/vpi settings for the "pppoe_0_35_1" in the ut300r2u modem?
NO NO most important Entry.
Modem is UTstar : Router is D-Link trying to use it for PF only now .
What ever you do make/take a copy of present settings of UTstar in a notebook , so that you don't loose Internet connection
Even with Utstar in "DialUp" "Bridged" mode select DMZ check your torrents , or whatever special programs you need.
Get familiar with the operation/s first.
more ====>>>> later.

 

[appus]

If you choose the 4port with wifi, you get WA3002G4 modem/router in Bangalore. that does have an option for port forwarding. Or you have to put in DMZ mode.