Help Me in Configuring WAG54G2 with BSNL Connection.

  • Thread starter Thread starter funnycool
  • Start date Start date
  • Replies Replies 55
  • Views Views 21,442
@essbebe, Luckily the dialer connection was working. So, logged into hyd pc via teamviewer. and checked the IP Address. assigned.Note: Today i think my father got disconnected when the internet was on. Check below ip address (output of ipconfig/all)Windows IP Configuration Host Name . . . . . . . . . . . . : dinesh Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : NoEthernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VIA Rhine II Fast Ethernet Adapter Physical Address. . . . . . . . . : 00-14-85-9C-36-1C Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Autoconfiguration IP Address. . . : 169.254.17.251 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : 169.254.17.251Ethernet adapter Local Area Connection 2: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Realtek RTL8139 Family PCI Fast Ethernet NIC Physical Address. . . . . . . . . : 00-55-D0-37-22-11PPP adapter bsnl: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface Physical Address. . . . . . . . . : 00-53-45-00-00-00 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 117.195.204.63 Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : 117.195.204.63 DNS Servers . . . . . . . . . . . : 218.248.255.146 218.248.255.139 NetBIOS over Tcpip. . . . . . . . : DisabledI tried accessing the router page from tokyo by typing in the ipaddress. it falied.I also tried 192.168.1.1 from IE on hyd PC. but it failed. (as pointed out by armaan. One cannot connect to router page settings. if connected via bridgemode)What should be my next step.Should i ask my father to disconnect from the dailer and type 192.168.1.1 and check whether it opens the router page or not?
 
thanks cyberwiz, i will try that out..

@funnycool, dont worry, i'll keep checking this page.

if u can access your router as essbebe said then fine otherwise ask someone else to do it at your place. et me know if u need any more help.



edit: u wont be able to access the router in bridge mode. so do what i said

use a pen/pencil for 3-4 seconds on the reset switch. then wait for some time. the router will give u some ip address. it WONT show limited connectivity & u will be able to access the router page & set it in PPPoE mode
 
Luckily the dialer connection was working.

Present problem : Linksys modem/wifi router.
Since neither your dad or brother ( at Hyderabad)
can change the settings in the BSNL wifi router

Solution :
Try to set "Always on" at HYDERABAD
or
You try to set the "ALWAYS ON" connection from TOKYO.

Para two: The Dynamic IP is different.
You are trying to access Himayatnagar (when your dad is in
say 210, first street !)

LAN IPv4 Address: 192.168.1.1 (* modem address )
MAC Address: 00-1e-40-ba-xx-xx
Default Gateway: 59.92.0.1 (* AREA HIMAYATNAGAR )
Primary DNS Server: 208.67.222.222
Secondary DNS Server: 208.67.220.220
Date/Time: Tue Mar 31 19:36:02 2009

MY dynamic IP now is 59.92.15.xxx (* SAY 210, HIMAYTNAGAR)
What is my IP address? Show my IP address. IP Tracer & IP Locator.
This is the IP your dad should report to you.
Then when you enter this ip, message will appear. ( using FireFox browser)
 
@rachit,I think you are right. I tried again accessing 192.168.1.1 from hyd pc by connecting via team viewr. Its not working. I wish i was there. i would have immediately reset the pin then wwould have gone to router settings page and set it to PPPoe. It is really strange that even after paying for connectoin. we have to struglle like this. BSNL guy should have done PPPoe. not sure whether he went to router settings or not. I should have used some screen recorder s/w and should aksed my brother to start it before that guy comes so that i can record all the things what he did.@essbebe,Dad again disconnected and connected. Here are the below ipconfig/all detailsWindows IP Configuration Host Name . . . . . . . . . . . . : dinesh Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : NoEthernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VIA Rhine II Fast Ethernet Adapter Physical Address. . . . . . . . . : 00-14-85-9C-36-1C Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Autoconfiguration IP Address. . . : 169.254.17.251 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : 169.254.17.251Ethernet adapter Local Area Connection 2: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Realtek RTL8139 Family PCI Fast Ethernet NIC Physical Address. . . . . . . . . : 00-55-D0-37-22-11PPP adapter bsnl: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface Physical Address. . . . . . . . . : 00-53-45-00-00-00 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 117.195.195.218 Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : 117.195.195.218 DNS Servers . . . . . . . . . . . : 218.248.255.146 218.248.255.139 NetBIOS over Tcpip. . . . . . . . : DisabledI compared the previous output with the correct pasted one. I see PPP adapter bsnl things chaninge. nothign changed.But when i checked ip address in the site you gave. it shows this IP : 117.195.195.218
 
Disconnect Beam Cable connection. from ethernet port of computer.
ONLY BSNL Rj45 to be connected.
YOU cannot have a STATIC IP from BSNL.
Then try from your end.

confirm this is for BSNL RJ45 input.
Ethernet adapter Local Area Connection 2:
Media State . . . . . . . . . . . : Media disconnected (*no connection?)
Description . . . . . . . . . . . : Realtek RTL8139 Family PCI Fast Ethernet NIC
Physical Address. . . . . . . . . : 00-55-D0-37-22-11

Or
From your end access desktop
Network/LAN properties TCP/IP
properties.
Change to Obtain IP address automatically.
Save apply.
THIS is from your cable BB connection.
Physical Address. . . . . . . . . : 00-14-85-9C-36-1C
Autoconfiguration IP Address. . . : 169.254.17.251
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . : 169.254.17.251
 
@essbebe,

Sorry for confusing you. but right now beam cable is not at all connected. only one calbe is connected which is from router(BSNL)

Ethernet adapter Local Area Connection 2:
Media State . . . . . . . . . . . : Media disconnected (*no connection?)
Description . . . . . . . . . . . : Realtek RTL8139 Family PCI Fast Ethernet NIC
Physical Address. . . . . . . . . : 00-55-D0-37-22-11
This is not connected

and below is used by BSNL connected ether net card (strange thig is that shos limited or no connectivity. but then with BSNL dail up the connecting to internet is done

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VIA Rhine II Fast Ethernet Adapter
Physical Address. . . . . . . . . : 00-14-85-9C-36-1C
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Autoconfiguration IP Address. . . : 169.254.17.251
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . : 169.254.17.251
i guess dail up connection thing is this:

PPP adapter bsnl:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
Physical Address. . . . . . . . . : 00-53-45-00-00-00
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 117.195.195.218
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 117.195.195.218
DNS Servers . . . . . . . . . . . : 218.248.255.146
218.248.255.139
NetBIOS over Tcpip. . . . . . . . : Disabled


Check the below screen shot. you can see on the right. shows the Rhine II Fast Ethernet Adapter. it shows with exclamation but shows the packets movements. and see it is connected from last 3 hrs. onthe right see properties and in the backgrould i tried typign url but doesn't open
http://img11.imageshack.us/img11/2504/bsnlscreenshot.jpg

Hope this helps. i want it to always on. once that is done will do wireless setup.
 
@funnycool:-
No need to panic go to network connections and change the Local Area Connection ip address to 192.168.1.2 subnet mask will be taken automatically, give default gateway 192.168.1.1 and DNS servers give 208.67.222.222 and 208.67.220.220 check the link if you want any further help on changing ip address for your LAN. It will also solve the problem of limited connectivity you have. After this open 192.168.1.1 it should work.

Then follow my above steps for changing to PPPoE.
 
@armaan,Thanks. but as i told you i connect to hyd pc via team viewer. I can do all this things by being online. Let me find some frnd who can actually go to the house and do it.
 
You can do this from teamviewer.

If i do this i think the internet on hyd pc will go and i may get disconnected from teamviewer. am i right?
 
Back