Nokia G-140W-F bridge mode?

[akapur]

Do you have Intel or Realtek NICs?

I'm honestly not sure. I have the Netgate SG-3100. I also have an ACT line connected as a second WAN on which I get the full 300mbps no problem. Just the Airtel gives me 100 on the PFsense as well as if I plug it in to my laptop. My settings are:

 

[rajil.s]

Netgate SG-3100 should tuned well since it is official hardware. This page is useful for NIC tuning.

If you are getting 100mbps with laptop connected to the Nokia modem, then pfsense should not be the issue. I would try the following:
1. Change ethernet cable.
2. Try setting PPPOE on the Nokia router itself and check what speed you get on the laptop.

 

[akapur]

2. Try setting PPPOE on the Nokia router itself and check what speed you get on the laptop.

Oddly, the nokia already has PPPoE enabled and If I connect to the Nokia's wifi or lan ports 1-3 (route) via my laptop I get the full 300mbps speed.

 

[rajil.s]

What happens if you disable the PPPOE in Nokia and then do a speedtest on lan port 4?

My speculation is that the Airtel is detecting multiple WANs, and sharing the bandwidth.

 

[akapur]

What happens if you disable the PPPOE in Nokia and then do a speedtest on lan port 4?

I am not able to disable it as all the options to change any WAN settings in the Nokia are disabled and grayed out. Any idea how I can enable it?

 

[akapur]

Just to update everyone, it was resolved from the Airtel backend team at their NOC.

 

[rajil.s]

@akapur It might be worthwhile explaining what was done by Airtel backend.

 

[akapur]

@akapur It might be worthwhile explaining what was done by Airtel backend.

I wish I knew. The technicians came over and plugged their own laptop into the bridged lan port, and saw the same 100mbps speeds. They then made a few calls and had it fixed. Never explained. Just said it was fixed from the NOC

 

[SMoothPocket]

@fizified use inspect element and delete the attribute "disabled" from the input tag for the drop down for channel selection. Then save the settings.

yes sir but its showing error code LanWLan object :5 kindly help

 

[peace12345]

Hi, I am from Nepal. My isp worldlink never provides login and configurations.It only has an option of status in configuration page. If you kow please help