Possible to use the SIP/Voip from voice on FTTH with Freepbx or something similar?

[greghouse]

@varkey

I did according to Mr. Dileep's tutorial here :
Source
and also did static routing. I also know all the details of my VoIP account. But I am not able to ping the VOIP server from my phone. i can ping from my router. my router is Netlink ONT HG326R

 

[varkey]

What static routes did you add? Screenshots please

 

[greghouse]

This is my routes Updated routes below

 

[varkey]

And what's the IP address of your SIP server?

 

[greghouse]

This is the VOIP page

 

[greghouse]

I also disabled SIP, and did some routes after I sent you the previous msg

 

[sloj]

@dhyaneshwar94 Which is your voice gateway IP address, 10.119.112.1 or 10.118.144.1?

 

[greghouse]

10.110.84.1
Can you help me please... Using teamviewer? or can you DM me?

 

[drtech]

I don't know if this thread is still active, but does anyone here has had any success in using the VOIP details as a trunk in FreePBX for outbound as well as inbound calls?

I have been all over the internet, but I can't find a single on how to make FreePBX register an extension as a SIP trunk. Some have said that this is not possible, but it certainly is, since I have used an FXO gateway which behaves quite like an extension.

If anyone here can please help me out, on how to set up the VOIP extension as a trunk (be it from BSNL / AIRTEL / LOCAL ISP/ BSNL WINGS), it would be of great help.

 

[sloj]

I can't tell you the exact steps since I haven't used FreePBX but you have to configure your VOIP details on FreePBX and then create internal profiles for as many devices as you want to connect. But you still have a single VOIP number and not a trunk setup.