Slow speed on my bsnl ftth

[Trex]

If you are comfortable can I check some config on remote?

 

[supukabi]

@Trex no problem but I have only one pc so now it is occupied when I will get I will let you know, if you want any router config screen shot I can post here right now.

 

[Trex]

run this command in powershell as administrator and post result.

Get-NetAdapter | SELECT name, LinkSpeed, fullduplex | ft -autosize

 

[Oppili]

till how much mtu reduced value you tried ? , bsnl is known for mtu problem

 

[supukabi]

@Trex here you go

 

[Trex]

Are you getting low speed on phone also?

 

[supukabi]

@Trex via Wi-Fi then yes.

 

[supukabi]

@Oppili till 1430

 

[Oppili]

use 1400 / 1300 as mtu,

if still not, can try bridging ont if you have a router

 

[sloj]

@supukabi Since you are getting the same issue on multiple devices I suggest reset the ONT. If ONT is remotely maintained it will get the settings automatically. In case it's not remotely maintained, make a backup of the settings by downloading. It should be under Device Management (under Management). After reset upload the settings again to ONT.