Huawei UMG1831 speed upto 28.8 Mbps

  • Thread starter Thread starter mountk2
  • Start date Start date
  • Replies Replies 51
  • Views Views 27,255
can ny1 guide this step by step???.... if sumthing goes wrong... i am worried :(
 
^^dint get your point? u mean will loose the warranty?
 
vibhuvw: yes he meant, you can damage your modem permanently, you may loose IMEI number making it un-workable and even if you flashed it a single time, you loose the warranty as mostmanufacturers want their service center to do the upgrade but not the end user.
 
yes flashing means, wiping out the in-built modem software(firmware) and re-installing a newer onemany operator make their custom version, many guys distribute non-branded ones etc etc.One should not flash the modem if its not giving problems, but as in case with this thread OP flashed it to get the support for 28mbps which UMG1831 was capable of and loading thenewer firmware made it possible for the modem to deliver that speed.
 
After flashing with k4505 firmware the mobile partner shows device name as E1831. Ya voice call is working fine. but my modem installer drive is corrupted. Any way to revive it ?
 


Agree with modem care, after upgrading firmware, modem will get heated up and will reset after an hour of usage, also many users reported IMEI getting erased once they tried downgrading back to original tmobile firmware. so better to avoid doing the firmware update, if already done, revert back before your modem goes for a toss.Knowledge sharing is good, but at times can be destructive like using k4505 firmware on 1831.
 
This thing is nice that goees upto 28mbps. But do you think we would speed like 20mbps and above using this device?
 
@Dushie, @ghpk

Flashing K4505 modem with K4505 update and UMG1831 with 1831 update makes nothing wrong.

K4505 modem behaves smoothly after update, since it is written specifically for K4505. Yes K4505 modem is also originally manufactured as 21.6 Mbps card. Only updating with K4505 specific files, it is upgraded to 28.8Mbps.

But flashing UMG 1831 with K4505 update is subject to owner's risk.Some plus some minus.

Normally any update SW will check the compatibility of the device and SW, before installation, and will exhibit warning or refuse to install. Here nothing happened. Is it the bug in the update SW ?


umg 1831 alredy supported 21.6 mpbs with all firmware

not need unbranded firmware like k4505,e182e

k4505,e182e and all 21 mpbs firmwares match to umg 1831

am get 1000kpbs DL in my 7.2 mpbs modem with download manager!!! its magic



am get 1000kpbs DL in my 7.2 mpbs modem with download manager!!! its magic

1000kbps = 0.98Mbps

So getting a speed of 0.98Mbps with 7.2Mbps card, what is the magic ?
 
umg 1831 alredy supported 21.6 mpbs with all firmware

not need unbranded firmware like k4505,e182e

k4505,e182e and all 21 mpbs firmwares match to umg 1831

am get 1000kpbs DL in my 7.2 mpbs modem with download manager!!! its magic


Hi modemcare,
I suppose u r frm cochin. Are the bsnl towers in cochin upgraded to 7.2 Mbps ?? Can u tell me the location, where u were getting this speed.

---------- Post added at 02:32 PM ---------- Previous post was at 02:19 PM ----------

We should always be careful with firmware update... coz downgrading of firmware is not possible in most of the cases, (in case any issue arises).
Should resort to update only if the modem is giving problems with the current firmware.
Then regarding the Voice call, it'll be unlocked hopefully sooner or later in the Original UMG1831 firmware itself. So its better to wait for that. Video call is possible with the latest Mobile Partner Dashboard update. It also supports MMS (need to configure the settings properly) as well as USSD...!!
Just for the Voice call option, its not worth messing up with the hardware...!!
 

Back