VOIP softphone setup with just ONT and nothing else.

  • Thread starter Thread starter sloj
  • Start date Start date
  • Replies Replies 63
  • Views Views 12,430

sloj

Observer
Messages
2,174
Location
Guwahati
ISP
BSNL

After this was posted, I looked again at my voice WAN config and realized its Service Mode was set to VOICE. So I changed it to VOICE_INTERNET and voila I can ping the voice gateway but not SIP server. So a static route needs to be made. Network -> Router -> Static Route and do the necessary changes.

Capture.JPG


Destination is the SIP server address, Gateway is voice gateway. And we are connected.

Things I did differently than the linked post. Disabled SIP under Application -> ALG configuration. Routers SIP ALG - VoIP-Info.

Updated Here
 
Last edited:
If you have a config backup or know the config parameters, you can try resetting the ONT and check.
 
Upvote 0

Back