Now when i type http://192.168.1.1 in my address bar i get \"Page Not Found\" error in my browser.
Is ur firewall blocking access to 192.168.1.1??????????
Is ur firewall blocking access to 192.168.1.1??????????
-
Amazon Deals - ToS - Like us?
Utstarcom Bridge Mode Configuration And Automatic Router Reboot
- Thread starter cyberwiz
- Start date
- Replies 84
- Views 46,166
revesenker
Newbie
Which is the correct tutorial to follow if i reset the modem back to factory settings ?I have UT300R2U Modem.I want to make it as "Dial-Up" connection.:hysterical:
mtnltriband
Newbie
Dear Cyberwiz,
I am having some queries related to ADSL . Please dispose them. Thanks in advance.
1.I need a dedicated connectivity since I trade online in shares. I cant tolerate downtime even for 5 minutes. I am cost conscious and so cant go for leased line or other options.
So for dedicated connectivity what tweaks I should do at my end For example running internet in bridge mode , changing DNS servers etc
2.Often my net is up as per router statistics but I log out of Yahoo messenger and other applications , web pages don’t open .When I run diagnostics in router all test pass except DNS. In order to get rid of this problem I have changed my DNS to 4.2.2.1 .
Note : I have uncheck the option in router window assign dns auto , in my router window dns are 4.2.2.1 .Even in lan properties dns 4.2.2.1.
Even after this I face problem :-(....link is up but unable to log in Yahoo Mess
Cyberwiz, tell me if I am logged in yahoo messenger or other applications and my DNS gets down will I log out ? Or I will remain logged in ? I want to know that if I am logged in and YM is running and after that DNS goes down I can chat with yahoo messenger or not. Thus till DNS is up I will be able to use applications and the moment it gets down I wont ?
3.In bridge mode if my adsl link gets down , how can I auto connect once the link is up. Right now whenever the link is down I have to manually disconnect the dial up comnnection ( bridge mode) and then reconnect.
4.I have read abt port forwarding in many post. Tried to understand it but was futile. Cyberwiz as I said I trade in shares so by port forwarding can I make any special settings for my share biz software (application) so that higher bandwidth is dedicated to it ?
5.I have only one pc so bridge mode or ppoe which one I should use ?
6.Last in order to increase the download speed what twaks I should do in my pc ?
Thanks for reading my queries , I hope you will take time to dispose them , once again thanks in advance.
Experts other than cyberwiz can also answer my queries ........
I am having some queries related to ADSL . Please dispose them. Thanks in advance.
1.I need a dedicated connectivity since I trade online in shares. I cant tolerate downtime even for 5 minutes. I am cost conscious and so cant go for leased line or other options.
So for dedicated connectivity what tweaks I should do at my end For example running internet in bridge mode , changing DNS servers etc
2.Often my net is up as per router statistics but I log out of Yahoo messenger and other applications , web pages don’t open .When I run diagnostics in router all test pass except DNS. In order to get rid of this problem I have changed my DNS to 4.2.2.1 .
Note : I have uncheck the option in router window assign dns auto , in my router window dns are 4.2.2.1 .Even in lan properties dns 4.2.2.1.
Even after this I face problem :-(....link is up but unable to log in Yahoo Mess
Cyberwiz, tell me if I am logged in yahoo messenger or other applications and my DNS gets down will I log out ? Or I will remain logged in ? I want to know that if I am logged in and YM is running and after that DNS goes down I can chat with yahoo messenger or not. Thus till DNS is up I will be able to use applications and the moment it gets down I wont ?
3.In bridge mode if my adsl link gets down , how can I auto connect once the link is up. Right now whenever the link is down I have to manually disconnect the dial up comnnection ( bridge mode) and then reconnect.
4.I have read abt port forwarding in many post. Tried to understand it but was futile. Cyberwiz as I said I trade in shares so by port forwarding can I make any special settings for my share biz software (application) so that higher bandwidth is dedicated to it ?
5.I have only one pc so bridge mode or ppoe which one I should use ?
6.Last in order to increase the download speed what twaks I should do in my pc ?
Thanks for reading my queries , I hope you will take time to dispose them , once again thanks in advance.
Experts other than cyberwiz can also answer my queries ........
mtnltriband
Newbie
Cyberwiz and others waiting for the reply...see above post 
1.I need a dedicated connectivity since I trade online in shares. I cant tolerate downtime even for 5 minutes. I am cost conscious and so cant go for leased line or other options.
So for dedicated connectivity what tweaks I should do at my end For example running internet in bridge mode , changing DNS servers etc
reliability of connection will always depend on MTNL
2.Often my net is up as per router statistics but I log out of Yahoo messenger and other applications , web pages don’t open .When I run diagnostics in router all test pass except DNS. In order to get rid of this problem I have changed my DNS to 4.2.2.1 .
Note : I have uncheck the option in router window assign dns auto , in my router window dns are 4.2.2.1 .Even in lan properties dns 4.2.2.1.
Even after this I face problem :-(....link is up but unable to log in Yahoo Mess
When this prob occurs use nslookup from the command prompt with a different DNS server to ascertain if the prob is with DNS or the gateway is failing u . Dont go by the router notification that link is up...always do tracert/ping with an IP address and not domain name (will eliminate DNS issue and tell where the problem is)
Cyberwiz, tell me if I am logged in yahoo messenger or other applications and my DNS gets down will I log out ? Or I will remain logged in ? I want to know that if I am logged in and YM is running and after that DNS goes down I can chat with yahoo messenger or not. Thus till DNS is up I will be able to use applications and the moment it gets down I wont ?
I think Ymessemger does the DNS lookup only once while loggin on..so even if DNS fails it would be having the IP address of the server so u should not log out..as far as chatting is concerned..the connection to remote party is handled by the Ymessenger server....Here i know for sure that the initiation is done by the messenger server but i am not sure if the chat conversation is also relayed through the server or by direct IP connection as in the case of skype. In either case once the chat conversation has started DNS failure should not affect it.
3.In bridge mode if my adsl link gets down , how can I auto connect once the link is up. Right now whenever the link is down I have to manually disconnect the dial up comnnection ( bridge mode) and then reconnect.
As far as reconnection is concerned windows PPPOE client is less reliable than the PPP daemon running on the router..
4.I have read abt port forwarding in many post. Tried to understand it but was futile. Cyberwiz as I said I trade in shares so by port forwarding can I make any special settings for my share biz software (application) so that higher bandwidth is dedicated to it ?
U are mixing port forwarding with QoS, both are different..but even u want to use qos .its only outgoing qos that u can effectively use incoming QoS is futile
5.I have only one pc so bridge mode or ppoe which one I should use ?
How do i know? thats for u to decide
6.Last in order to increase the download speed what twaks I should do in my pc ?
Google
So for dedicated connectivity what tweaks I should do at my end For example running internet in bridge mode , changing DNS servers etc
reliability of connection will always depend on MTNL
2.Often my net is up as per router statistics but I log out of Yahoo messenger and other applications , web pages don’t open .When I run diagnostics in router all test pass except DNS. In order to get rid of this problem I have changed my DNS to 4.2.2.1 .
Note : I have uncheck the option in router window assign dns auto , in my router window dns are 4.2.2.1 .Even in lan properties dns 4.2.2.1.
Even after this I face problem :-(....link is up but unable to log in Yahoo Mess
When this prob occurs use nslookup from the command prompt with a different DNS server to ascertain if the prob is with DNS or the gateway is failing u . Dont go by the router notification that link is up...always do tracert/ping with an IP address and not domain name (will eliminate DNS issue and tell where the problem is)
Cyberwiz, tell me if I am logged in yahoo messenger or other applications and my DNS gets down will I log out ? Or I will remain logged in ? I want to know that if I am logged in and YM is running and after that DNS goes down I can chat with yahoo messenger or not. Thus till DNS is up I will be able to use applications and the moment it gets down I wont ?
I think Ymessemger does the DNS lookup only once while loggin on..so even if DNS fails it would be having the IP address of the server so u should not log out..as far as chatting is concerned..the connection to remote party is handled by the Ymessenger server....Here i know for sure that the initiation is done by the messenger server but i am not sure if the chat conversation is also relayed through the server or by direct IP connection as in the case of skype. In either case once the chat conversation has started DNS failure should not affect it.
3.In bridge mode if my adsl link gets down , how can I auto connect once the link is up. Right now whenever the link is down I have to manually disconnect the dial up comnnection ( bridge mode) and then reconnect.
As far as reconnection is concerned windows PPPOE client is less reliable than the PPP daemon running on the router..
4.I have read abt port forwarding in many post. Tried to understand it but was futile. Cyberwiz as I said I trade in shares so by port forwarding can I make any special settings for my share biz software (application) so that higher bandwidth is dedicated to it ?
U are mixing port forwarding with QoS, both are different..but even u want to use qos .its only outgoing qos that u can effectively use incoming QoS is futile
5.I have only one pc so bridge mode or ppoe which one I should use ?
How do i know? thats for u to decide
6.Last in order to increase the download speed what twaks I should do in my pc ?
mtnltriband
Newbie
Dear Cyberwiz,Thanks for taking time to reply me . I thank you for your support.please tell me in bridge mode while connectiing through dialer MTNL charges for tele calls also or only for mbs downloaded ? In ppoe i was charged only for mbs.ref:2 above post.I dont know how to do the nslook up traceroute . What I do is In command window I type ipconfig/all For PPP adapter MTNL ( dialer connetion in bridge) I get the default gateway and dns .When I ping the gateway I get reply. when i ping the dns its time out.So it is DNS problem ?I have changed my dns to 4.2.2.1 in LAN but i get another dns for PPP adapter MTNL in command window. What i can do to change the dns for PPP.Incase , if the request is timed out for default gateway and the problem is with gateway what we can do at our end? Cyberwiz pls do help me out . i thanks for ur time and support in advance.
Dear Cyberwiz,
please tell me in bridge mode while connectiing through dialer MTNL charges for tele calls also or only for mbs downloaded ? In ppoe i was charged only for mbs.
telecalls? do u mean voip? mode doesnt matter -- any data from ur side that goes beyond their gateway is chargeable.
ref:2 above post.
I dont know how to do the nslook up traceroute . What I do is
In command window I type ipconfig/all
For PPP adapter MTNL ( dialer connetion in bridge) I get the default gateway and dns .
When I ping the gateway I get reply. when i ping the dns its time out.
So it is DNS problem ?
type nslookup at cmd prompt the result will tell u the dns teh computer is actually using..if ping of DNS times times out then it is most probably DNS prob.
I have changed my dns to 4.2.2.1 in LAN but i get another dns for PPP adapter MTNL in command window. What i can do to change the dns for PPP.
That should change the default DNS.. if doesnt change then double click on PPP icon in tray (not lan icon) goto >> properties>>networking >>> TCP/IP proeprties and specify DNS addresses there
Incase , if the request is timed out for default gateway and the problem is with gateway what we can do at our end?
If modem is synced and gateway is timing out/or u cant authenticate with BRAS then its a prob at MTNL's end and u cant do much about it..
please tell me in bridge mode while connectiing through dialer MTNL charges for tele calls also or only for mbs downloaded ? In ppoe i was charged only for mbs.
telecalls? do u mean voip? mode doesnt matter -- any data from ur side that goes beyond their gateway is chargeable.
ref:2 above post.
I dont know how to do the nslook up traceroute . What I do is
In command window I type ipconfig/all
For PPP adapter MTNL ( dialer connetion in bridge) I get the default gateway and dns .
When I ping the gateway I get reply. when i ping the dns its time out.
So it is DNS problem ?
type nslookup at cmd prompt the result will tell u the dns teh computer is actually using..if ping of DNS times times out then it is most probably DNS prob.
I have changed my dns to 4.2.2.1 in LAN but i get another dns for PPP adapter MTNL in command window. What i can do to change the dns for PPP.
That should change the default DNS.. if doesnt change then double click on PPP icon in tray (not lan icon) goto >> properties>>networking >>> TCP/IP proeprties and specify DNS addresses there
Incase , if the request is timed out for default gateway and the problem is with gateway what we can do at our end?
If modem is synced and gateway is timing out/or u cant authenticate with BRAS then its a prob at MTNL's end and u cant do much about it..
prashob~ms
Newbie
i am facing problem in configuring ut 300r2u modem in bsnl dataone connection.
i have done every thing,but not able to establish a connection by dialing...when i dial i get error 678
what all i have done
disabled Dhcp in modem
selected bridge mode in modem
saved and & rebooted modem no problem ter
assigned ip address 192.168.1.3 to lan
assigned free dns ip address to lan
created a new connection with username and password
but wen i dial this is what i get
http://img266.imageshack.us/my.php?image=errorsc1.jpg
i have done every thing,but not able to establish a connection by dialing...when i dial i get error 678
what all i have done
disabled Dhcp in modem
selected bridge mode in modem
saved and & rebooted modem no problem ter
assigned ip address 192.168.1.3 to lan
assigned free dns ip address to lan
created a new connection with username and password
but wen i dial this is what i get
http://img266.imageshack.us/my.php?image=errorsc1.jpg
Similar threads
